Hot Water Solutions
Have you had problems with tradesmen in the past?
And don't know who to trust?
Visit our tips on how to choose the right trades company.
We specialise in Hot Water Solutions
Brisbane Plumbing & Gas specialise in residential & commercial hot water systems repairs, maintenance and
installations across the greater Brisbane area.
We are familiar with all major hot water system brands and carry spare parts that are required to solve 99% of all hot water system problems.
Don’t take a chance when selecting a company to fix your hot water system, we have heard too many nightmare stories of people being charged good money to have their hot water system repaired or replaced only to find that it still doesn't do the job that is required to keep your hot water needs satisfied.
Don’t be another victim of substandard workmanship!
Did You Know
Government rule changes (again) still allow the installation of electric hot water systems regardless of whether or not gas is available at your property. Some people are not aware of this.
You can minimise the chances of your hot water system failing therefore typically increasing its lifespan by following the manufacturers maintenance instructions. Check and replace Relief / Expansion control valves and Sacrificial Anodes when recommended.
We can assist you make your new hot water system purchase easier with a repayment plan - just ask us how.
Relief valve continually dripping water
More often than not it is an easy job of just replacing the valve. If not then pressure and temperature problems could be the cause. Remember your Relief/Expansion control valves should be checked for adequate performance or replaced at intervals NOT exceeding 5 years.
This applies to ALL
hot water system relief valves even if yours is up on the roof with you solar hot water tank. It has been estimated that a continually dripping relief/expansion control valve could be costing the average electric hot water system user approximately $200 PER QUARTER!
Leaking hot water system/tank
In this event you’ll more than likely have to replace your tank. When a hot water system fails due to corrosion leaks can usually be found at the bottom/base of the tank however it is also common for a failed system to show water to be leaking out the top of your hot water tank which is also caused by corrosion.
Remember to have your Sacrificial Anode checked and replaced as soon as is necessary as this simple measure can extend the lifespan of your system for several years.
been estimated that a continually dripping relief/expansion control valve could be costing the average
electric hot water system user approximately $200 PER QUARTER!
Hot water not hot enough
Could be a number of different reasons for this to happen i.e. Thermostat, Tempering Valve or interruption of electricity or gas supply. If you have a Saxon hot water system then check that you use the Filler Valve to top up every 6 months.
Hot Water System Services
Don't Just Take Our Word...
"I have used Brisbane Plumbing and Gas several times now and have been more than happy with the work and the price and they do turn up on time. The last time I used them, they fixed my solar hot water system, 100% professional workmanship. I would recommend to others with no hesitation."
"Fantastic service. Billy arrived right on time, diagnosed the problem within minutes and carried the parts on the va. Overall could not have been happier."
Kathryn McMillan Prince